These Convex Double Faced Snap Grommets look great from both sides and feature a smooth glossy finish. They are easy to install and will accommodate up to a 10mm wide strap or drawstring.
Perfect for a modern upscale drawstring bag or pair them with a gate rings as a strap connector... or use them as a decorative element on your bag or clothing. Their slightly wider face give them a sleek professional look.
Each grommet consists of one male part and one female part, and are easily installed using a 3/8" or 7/16" setter and anvil, a grommet press or rubber mallet.
These grommets have little teeth on the underside which "pierce" your exterior and inner substrates which in turn, provide added security to keep the grommet in place. Adding a dab of glue will also aid in preventing the grommet from turning or popping out of the hole.
*** Sold in packages of Twelve. You will receive 12 male pieces and 12 female pieces.
Note: These need actual "force" to push together; they are not the "click" together kind found by some suppliers which in my opinion are not as heavy duty. These can be installed with a Grommet/Rivet Press, a Rubber Mallet or by using a grommet awl.
Installation: Place the male part on your anvil. The male part is slightly smaller in width and will nestle within the the female part. Place the female part on top of the male part and insert your setter. Give the setter a couple of hard taps with a hammer or until the male part is fully inserted and flush with the female part cap. To protect your grommets from being scratched, it is advisable to place a small piece of fabric between the grommet parts and the anvil and setter.
Inner Grommet Dimensions: 10mm
Outer Dimensions: 20mm wide
Grommets will accommodate a bag thickness of 3mm.