Beyond the fact that these U-Shaped strap connectors are unique and gloriously glossy, these innovative connectors also replace the need to add rivets!! Yes, no rivets!! They are built into the connector :)
These strap connectors will accommodate a strap width of 4mm or a 4.5mm compressed strap.
Using the middle bar holes as your guide, punch two holes into the strap end, place your strap into the connector channel and screw the bar into place, and voila!! You now have instant riveting!! The connector is then attached to your bag using three additional screws and three washers.
Sold as a set of four, meaning you will receive four connectors, 4 full size washers and twelve screws.
Available now in Warm Light Gold and Glossy Gun Metal, as well as Glossy Nickel!!
Outer Dimensions: 34.5mm x 48mm x 7mm
Inner Dimensions: 32mm x 45mm
Inner Channel Width: 4.5mm
Bar Dimensions: 8mm x 30mm
Click here for our Installation Tutorial outlining step-by-step instructions and illustrations to install this hardware.
- Tips and Hints: You may also want to apply an adhesive such as Fabric Tac or Ht2 Guttermann Textile glue for extra bonding strength. Just dab a small amount along the front hardware plate and edge channels being careful to avoid having it ooze out the sides when the hardware has been completely installed.