Another innovative connector that replaces the need to add rivets!! These Rivet Bar Rectangular Shaped Connectors also have the rivets built into the connector middle bar and are finished in a glossy, shiny polish plating
These strap connectors will accommodate a strap thickness of 4mm.
Using the middle bar holes as your guide, punch two holes into the strap end, place your strap into the connector channel and screw the bar into place, and voila!! You now have instant riveting!!
These connectors can be used as-is or combined with strap ends to complete a polished look. Just thread the straps with the metal ends through the connector to the desired length and secure in place with the rivet bar. The pink bag below is an example of how this would look.
The connector is then attached to your bag using four additional screws and four washers.
Available in Glossy Nickel and Warm Light Gold Finishes at the moment.
Sold in sets of four meaning you will receive four connectors, 4 full size washers (or 16 round washers) plus16 screws.
Outer Dimensions: 58.5mm x 23.5mm x 6.5mm
Inner Dimensions: 58.5mm x 20mm x 4mm
Inner Channel Width: 4mm
Bar Dimensions: 6.5mm x 35.5mm
Psst ... Need some Handbag Inspiration using this Hardware? Check out our Pinterest Feed below!!